Exotom-150

Sturdy, high-power cut-off machine for large workpieces

Exotom facts

  • Easy cutting of the hardest workpieces
  • Easy cutting of extra large workpieces
  • Intelligent feed control
  • Automatic cleaning
  • Easy positioning
  • Easy to use
  • 432 mm (17”) diameter cut-off wheel size

High cutting power and a spacious and accessible cutting chamber makes Exotom-150 ideal for cutting large workpieces or for large volume production. The unique ExciCut feature means faster and cooler cutting, less wear on the cut-off wheel and plane, deformation-free specimen surfaces.

Contact

Faster cutting

Exotom is ideal for cutting the hardest of materials, faster cutting of standard materials and very fast cutting of extra-large workpieces. OptiFeed force control enables cutting at the fastest possible speed within set parameters without overloading the workpiece and the cut-off wheel.

Minimum deformation

ExciCut technology ensures minimal contact area between the cut-off wheel and the workpiece with reduced risk of damage and less work in subsequent preparation processes.

Simple to operate

Two simple keys combined with a large graphic display are incorporated on a swivelling control panel. The multifunction knob enables easy control of all cutting parameters even when wearing working gloves. The joystick enables fast and precise positioning of the cut-off wheel.

KEY FEATURES THAT ENABLE HIGH-POWER CUTTING AND DEFORMATION-FREE SPECIMEN SURFACES

  • Exotom ExciCut

    ExciCut – cutting of the hardest materials

    ExciCut uses an oscillating movement of the cut-off wheel to reduce the contact area between the cut-off wheel and workpiece. This enables cutting of very hard materials in very large sizes, and also the use of harder cut-off wheels, which increases the lifetime of the wheels, thus reducing costs.

    ExciCut – cutting of the hardest materials
  • Exotom Direct Cut

    Direct Cutting

    Direct cutting mode is recommended for softer materials where the cut-off wheel moves down in a linear movement into the workpiece at the pre-set feed speed.

    Direct Cutting
  • Exotom AxioCut Step

    AxioCut – sectioning of extra-large workpieces

    AxioCut adds 150 mm cutting capacity for extra-large workpieces. The field-upgradable option includes Step cutting for very fast cutting and Sweep cutting for fast cutting combined with better wheel economy.

    AxioCut – sectioning of extra-large workpieces
  • Exotom OptiFeed

    OptiFeed

    OptiFeed optimizes the feed speed without sacrificing the quality of the cut or good wheel economy. During cutting, Exotom-150 continuously measures the load on the cutting arm. Once the pre-set force limit is reached, the feed speed is reduced to avoid damage. The feed rate is increased again once the load on the cutting arm decreases.

    OptiFeed
  • Exotom Unprecedented capacity and accessibility

    Unprecedented capacity and accessibility

    Spacious and accessible cutting chamber.

    Unprecedented capacity and accessibility
  • Exotom Two cutting tables

    Two cutting tables

    Fixed table and optional, moveable table.

    Two cutting tables
  • Exotom Laser straight edge for easy positioning

    Laser straight edge for easy positioning

    Marks the point where the cut-off wheel will enter the workpiece.

    Laser straight edge for easy positioning
  • Exotom Blocking mode

    Blocking mode

    Non-essential controls of the operation modes can be partly or fully blocked by using a pass code, to avoid operator errors and damage to the machine and samples.

    Blocking mode
  • Exotom Axiowash

    AxioWash*

    Struers' patented* automatic chamber cleaning function that can be used every day to keep the machine in optimal working condition.
    * AxioWash is protected under EP Pat no. 1965947.

    AxioWash*
  • Exotom AutoStop

    AutoStop

    During unattended operation, Exotom-150 automatically detects when the workpiece has been cut through, returning the wheel to its start position and stopping all motors.

    AutoStop
  • Exotom QuickPosition

    QuickPosition

    The QuickPosition function places the cut-off wheel rapidly in contact with the workpiece and retracts it immediately, ready for cutting. It can be used both before and during cutting.

    QuickPosition

Facts

Model Types

Exotom-150

Exotom-150

 

Exotom-150
Automatic cut-off machine with OptiFeed, ExciCut and Direct Cut.
7.5-9.0 kW (10-12 HP). For 432 mm (17") cut-off wheels. Fixed cutting table with
12 mm T-slots. Recirculation cooling unit, quick-clamping devices and vertical clamping system
respectively, are ordered separately.

Exotom-150, X-table
Same specifications as the Exotom-150, but with moveable cutting table with 12 mm T-slots for parallel cuts.

Exotom-150, AxioCut
Same specifications as Exitom-150 including Axiocut.

Exotom-150, X-table and AxioCut
Same specificationa as the Exotom-150 including moveable cutting table and Axiocut.

Struers’ equipment is in conformity with the provisions of the applicable International Directives and their appurtenant Standards.
Struers’ products are subject to constant product development. Therefore, we reserve the right to introduce changes in our products without notice.

Technical Data

Exotom-150 Technical Data Sheet

Struers Technical Data Sheets are designed to help you make the best choice of equipment for your particular purpose. You can find important information such as capacity and performance specifications, dimensions, weight, electrical data, noise levels, ambient conditions and safety. In many cases you can also obtain an overview of accessories offering higher capacity and performance.

Download technical data sheet
Technical Data Sheet
Magnutom Axitom Exotom Consumables

Looking for more

A wide range of cut-off wheels and accessories for all types of materialographic preparation is available.

  • Cut-off wheels
  • Clamping tools
  • Cooling system

Go to cutting consumables

Go to cutting accessories

Application specialists

The fast track to expert knowledge…

Correct preparation solutions

True structures require proper correct applications. Different material properties require broad application knowledge. Struers Application Specialists are experts in optimising preparation methods, because application knowledge is necessary to select the correct preparation solutions. Your material – our application solutions.

Birgitte Nielsen
Application Specialist, Struers ApS

Go to Knowledge

M8 Quote Birgitte

MEET SOME OF OUR CUSTOMERS

Don’t make do with what we say! Look for the truth in the experiences of the people who use our equipment and knowledge. We asked a few of our loyal customers to tell us what they think is most important about Struers.

John Crane Logo
We have been using Struers equipment and consumables for almost 30 years and have benefitted enormously from their unparalleled service and applications support. John Crane UK Ltd. (UK) Bill Taylor Materials & Forensics Engineer
Grinding Media Moly Cop Logo
We have always experienced extremely repeatable and consistent, high-quality results. The consistency and reliability of our Struers cutting machines was instrumental in our decision to install a similar Struers system in our plant in Indonesia. Grinding Media, Moly-Cop (Australia) Glenn Sullivan Technical Developments Manager
BRP Powertrain GmbH Logo
We are extremely satisfied with the highly competent service delivered by Struers. They always meet our needs quickly and efficiently. BRP Powertrain GmbH & Co. KG (Austria) Herr Thomas Brunmair Supervisor Material Lab.