TargetSystem

Automatic Target Preparation for Both Visible and Hidden Targets

TargetSystem facts

  • Drastically reduced preparation time
  • No dependency on operator skills
  • Full reproducibility
  • No need for costly abrasive films

TargetSystem is designed for target preparation of microelectronic components and delayering. It is the first failure analysis tool permitting real-time alignment and measurement of both visible and hidden targets, such as microvias and BGAs. System precision is an exceptional +/- 5.0 µm.

Contact

Short Preparation Times

An intelligent preparation system (IPS) automatically adapts the removal time and rate according to actual specimen properties and the grinding/polishing surface. This means fewer measurements and preparation times, down to less than 30 minutes.

Reproducibility

Automated processes make TargetSystem independent of operator skills, ensuring reproducibility regardless of the operator.

Low Operating Costs

TargetSystem can be used with any SiC paper, or any other consumable, and does not need costly abrasive films.

KEY UNITS THAT ENABLE AUTOMATIC TARGET PREPARATION FOR BOTH VISIBLE AND HIDDEN TARGETS

  • TargetSystem TargetMaster

    TargetMaster

    The heart of the TargetSystem is the TargetMaster, a 200 mm micropolisher with a closed polishing chamber to safeguard both preparation quality and the operator. Removal at the initial preparation step(s) is controlled by an electronic measuring system, for a rapid approach to the target. A second, in-line laser measuring system handles the demanding polishing steps.

    TargetMaster
  • TargetSystem Target Z

    TargetZ

    TargetZ is used for aligning and measuring specimens with visible (external) targets. With a powerful vision system of up to 680x magnification and its 15" TFT monitor, TargetZ makes it a simple task to map and align minute targets.

    TargetZ
  • TargetSystem TargetX

    TargetX

    TargetX is for hidden (internal) targets, and comprises a set-up station and a console. The set-up station is placed in the users x-ray (not included) and is operated from the external console, permitting real-time alignment and measuring.

    TargetX
  • TargetSystem TargetDoser

    TargetDoser

    TargetDoser is an automatic dosing station, providing preparation methods and process liquids to TargetMaster. TargetDoser comes with seven pumps and ten pre-programmed methods, and accommodates 200 user-defined methods.

    TargetDoser
  • TargetSystem TargetGrip

    TargetGrip

    TargetGrip is a tiltable specimen holder, dedicated to TargetMaster. It accommodates mounted samples up to 40 mm in diameter. Adapters are provided for larger specimens (TARIN), cross-sectioning (TARSC) and parallel polishing (TARPA), as well as a 40 mm to 25 mm adapter (TARAD), which serves as a SEM mount, as well.

    TargetGrip

Facts

Model types

TargetSystem

TargetMaster - automatic target preparation
TargetMaster
200 mm micropolisher for automatic target preparation. Tiltable holder for 30 mm specimens and 200 mm MD-Disk included.

The dosing system is ordered separately.


Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi


Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi

Struers’ equipment is in conformity with the provisions of the applicable international directives and their appurtenant standards.
Struers’ products are subject to constant product development. Therefore, we reserve the right to introduce changes to our products without notice.

Technical Data

TargetSystem Technical Data Sheet

Struers Technical Data Sheets are designed to help you make the best choice of equipment for your particular purpose. You can find important information such as capacity and performance specifications, dimensions, weight, electrical data, noise levels, ambient conditions, and safety. In many cases you can also obtain an overview of accessories offering higher capacity and performance.

Download Technical Data Sheet
Technical Data Sheet
TargetSystem Consumables

Looking for consumables?

Order your consumables directly from our e-Shop.

Go to consumables in e-shop

Correct preparation solutions

"True structures require proper and correct applications. Different material properties require broad application knowledge. Struers application specialists are experts in optimizing preparation methods, because application knowledge is necessary to select the correct preparation solutions. Your material – our application solutions.”

Birgitte Nielsen
Application Specialist, Struers ApS

Go to Knowledge

M8 Quote Birgitte

MEET SOME OF OUR CUSTOMERS

Don’t make do with what we say! Look for the truth in the experiences of the people who use our equipment and knowledge. We asked a few of our loyal customers to tell us what they think is most important about Struers.

Nissan Logo
Since adopting Struers equipment, we have made significant savings within our manufacturing process as a result of reduced manpower requirements and productivity improvements. Nissan Motor Manufacturing UK Ltd. John Smart Production Supervisor
BRP Powertrain GmbH Logo
We are extremely satisfied with the highly skilled service delivered by Struers. They always meet our needs quickly and efficiently. BRP Powertrain GmbH & Co. KG (Austria) Herr Thomas Brunmair Supervisor Material Lab
John Crane Logo
We have been using Struers equipment and consumables for almost 30 years and have benefitted enormously from their unparalleled service and applications support. John Crane UK Ltd. UK Bill Taylor Materials & Forensics Engineer