Discoplan-TS

Fast and Economical Production of Mineralogical Thin Sections

Discoplan-TS facts

  • Reducing investment
  • Fast preparation procedures
  • Combining cutting and grinding

Discoplan-TS is a versatile precision cutting and grinding machine for fast and economical production of petrographic and ceramic thin sections. Discoplan-TS combines the cutting and grinding processes in one machine, thus reducing investments and allowing for very fast preparation procedures.

The Discoplan-TS is the cornerstone of the Struers TS-Method™ for the preparation of thin sections, using a technique that provides outstanding quality and very high reproducibility, while being very easy to use.

Contact

Fast

Precision grinding to near final thickness saves time.

Economical

Cutting and grinding combined in a single machine reduces the investment requirement.

Easy to use

Simple to operate

KEY FEATURES THAT ENABLE FAST AND ECONOMICAL PRODUCTION OF MINERALOGICAL THIN SECTIONS

  • DiscoPlan cutting module

    Cutting Module

    The left-hand side of the Discoplan-TS takes care of the cutting. A choice of two types of diamond cut-off wheels ensures perfect cutting of all materials, with a minimum of damage. The cutting module of Discoplan-TS also carries out resectioning of the specimen (cutting off surplus material) via easy fixing of the thin section in a vacuum holder, controlled by a guide-rail on the machine table.

    Cutting Module
  • DiscoPlan grinding module

    Grinding Module

    The right-hand side of the Discoplan-TS is designed for precision grinding. Automatic preparation of thin sections demands that all glass slides have exactly the same thickness, with a tolerance of a few μm. A built-in micrometer ensures extreme precision. Precision grinding to near final thickness saves final processing time.

    Grinding Module

Facts

Model types

Discoplan-TS

Discoplan-TS precision thin section machine
Discoplan-TS
Precision thin section machine. With three vacuum chucks for grinding of three glass slides of 27 x 46 mm, 28 x 48 mm, or 30 x 45 mm, or two glass slides of 1.0 x 3.0" and specimens. Including holder for cutting of rocks (75 x 75 mm), holder for cutting of standard specimens (8.0 x 20 x 30 mm), dial gauge, and recirculation cooling unit. Diamond cutoff wheels, diamond cup-wheels, and vacuum pump are ordered separately.


Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi


Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi

Struers’ equipment is in conformity with the provisions of the applicable international directives and their appurtenant standards.
Struers’ products are subject to constant product development. Therefore, we reserve the right to introduce changes to our products without notice.

Technical Data

DiscoPlan-TS Technical Data Sheet

Struers Technical Data Sheets are designed to help you make the best choice of equipment for your particular purpose. You can find important information such as capacity and performance specifications, dimensions, weight, electrical data, noise levels, ambient conditions, and safety. In many cases you can also obtain an overview of accessories offering higher capacity and performance.

Download Technical Data Sheet
Technical Data Sheet
Secotom Minitom Accutom DiscoPlan TS Consumables

Looking for consumables?

Order your consumables directly from our e-Shop.

Go to consumables in e-shop

Correct preparation solutions

"True structures require proper and correct applications. Different material properties require broad application knowledge. Struers application specialists are experts in optimizing preparation methods, because application knowledge is necessary to select the correct preparation solutions. Your material – our application solutions.”

Birgitte Nielsen
Application Specialist, Struers ApS

Go to Knowledge

M8 Quote Birgitte

MEET SOME OF OUR CUSTOMERS

Don’t make do with what we say! Look for the truth in the experiences of the people who use our equipment and knowledge. We asked a few of our loyal customers to tell us what they think is most important about Struers.

WWU Münster Institut für Planetologie Logo
My relationship with Struers dates back over many years. The reason is their expert advice, good service, and their use of our application laboratory in the case of difficult questions that are best resolved on-site. WWU Münster, Institut für Planetologie Ursula Heitmann Mineral Specimen Preparer
Nissan Logo
Since adopting Struers equipment, we have made significant savings within our manufacturing process as a result of reduced manpower requirements and productivity improvements. Nissan Motor Manufacturing UK Ltd. John Smart Production Supervisor
John Crane Logo
We have been using Struers equipment and consumables for almost 30 years and have benefitted enormously from their unparalleled service and applications support. John Crane UK Ltd. UK Bill Taylor Materials & Forensics Engineer