Tegra Hot Cell System

User-friendly equipment for materialographic preparation of radioactive material in hot cells

Tegra Hot Cell System facts

  • Easy installation in hot cell
  • Robust and reliable
  • Easy to use
  • Remote operation
  • Remote handling of specimens
  • Radiation-resistant materials
  • Minimal radioactive waste

User-friendly equipment for materialographic preparation of radioactive material in hot cells

Contact

Easy handling

Adapted for remote operation and remote handling of specimens, the equipment enables changing of consumables between preparation steps and is operated using touchpad controls. Manipulation is simplified by using the MDSystem with polishing cloths and magnetic fixation of grinding and polishing disks.

Easy to clean and decontaminate

Special design and surface treatment of the stainless steel or aluminum cabinets enable easy cleaning. The tray on the grinding and polishing machines is detachable for easy and safe removal of contaminated debris.

Easy maintenance

A sturdy, reliable design minimizes the need for service and repair. The equipment can be moved and turned in the hot cell for easy access. Maintenance and exchange of vital parts including motors, belts, and plastic tubes can be carried out in the cell using manipulators.

Facts

Model types

TegraPol-15 for Hot Cell

TegraPol

Grinding/polishing machine with variable speed (40-600 rpm in steps of 10 rpm).For disk 200 mm (8.0") dia. 370 W motor. Complete with control box with electric parts and controls for rack mounting outside the hot cell. Disks are ordered separately. Length of supply cable is 8.0 m; if other length is wanted, specify when ordering.

1/3 x 200–240 V / 50-60 Hz.

TegraForce-1 for Hot Cell

TegraForce
Automatic specimen mover with variable speed (50-150 rpm in steps of 10 rpm). For fine grinding and polishing of one to three single specimens or grinding and polishing of three specimens fixed in a specimen holder. Dosing unit, specimen mover plates, and specimen holders are ordered separately. Length of tube for compressed air is 8.0 m; if another length is wanted, specify when ordering.

TegraDoser-5 for Hot Cell

TegraDoser
Dosing unit and database for preparation methods. With peristaltic pumps. For automatic dosing of diamond suspensions and lubricants. Can be used for supply of water. TegraDoser-5 for hot cell is placed outside the hot cell. The nozzle block is mounted on TegraForce-1 for a hot cell. The peristaltic pumps cannot reverse. The built-in database contains the ten Metalog Guide methods and has a capacity for additional 190 user-defined preparation methods. Length of tubes is 8.0 m; if other lengths are wanted, specify when ordering.
With six pumps for diamond suspensions or lubricants and one pump for water.

Struers’ equipment is in conformity with the provisions of the applicable international directives and their appurtenant standards.
Struers’ products are subject to constant product development. Therefore, we reserve the right to introduce changes to our products without notice.

Technical Data

Tegra Hot Cell System Technical Data Sheet

Struers Technical Data Sheets are designed to help you make the best choice of equipment for your particular purpose. You can find important information such as capacity and performance specifications, dimensions, weight, electrical data, noise levels, ambient conditions, and safety. In many cases you can also obtain an overview of accessories offering higher capacity and performance.

Download Technical Data Sheet
Technical Data Sheet
Hexamatic Maps2 Tegramin Consumables

Looking for consumables?

Order your consumables directly from our e-Shop.

Go to consumables in e-shop

Correct preparation solutions

"True structures require proper and correct applications. Different material properties require broad application knowledge. Struers application specialists are experts in optimizing preparation methods, because application knowledge is necessary to select the correct preparation solutions. Your material – our application solutions.”

Birgitte Nielsen
Application Specialist, Struers ApS

Go to Knowledge

M8 Quote Birgitte

MEET SOME OF OUR CUSTOMERS

Don’t make do with what we say! Look for the truth in the experiences of the people who use our equipment and knowledge. We asked a few of our loyal customers to tell us what they think is most important about Struers.

Nissan Logo
Since adopting Struers equipment, we have made significant savings within our manufacturing process as a result of reduced manpower requirements and productivity improvements. Nissan Motor Manufacturing UK Ltd. John Smart Production Supervisor
XPS Consulting and Testwork Services Logo
XPS Consulting & Testwork Services is a licensed metallurgical engineering and testwork business that includes mineralogical and materials characterization. We have used Struers’ sample preparation equipment and lab consumables for almost 20 years and are very satisfied with the quality of the products and the support they provide to us. As a consulting firm, we strive to produce the highest quality results for our customers, and the Struers’ products have assisted us in reaching that goal. XPS Consulting & Testwork Services (Canada) Patricia Stack Mineral Science Department
Ideal Fasteners Logo
The backbone of our quality assurance program, our Struers laboratory promotes ease of use, resulting in high output and efficient use of our human resources and huge time savings. In my opinion, Struers equipment provides the most efficient and consistent method for examining the quality of our fastener products. Ideal Fasteners Pty. Ltd. (Australia) Neville Deutscher Managing Director