Minitom Remote facts
- Cutting of all types of materialographic workpieces
- Easy to use
- Easy to clean
- 75-127 mm (3”-5”) diameter cut-off wheel size
The Minitom Remote precision cut-off machine is one of the components in the Struers Remote System. The machine is based on Struers standard Minitom. The machine is adapted to allow remote operation and remote handling of specimens. Maintenance can be carried out in the cell, using manipulators.
Simple to operate
Fixation of the specimen holder and setting the cutting parameters are easy and very fast.
Low speed
Low speed to ensure very gentle and precise cutting
Built-in tank for cooling fluid
To ensure optimal cooling and easy maintenance of the cooling fluid
Facts
Model types
Minitom Remote
Minitom Remote
Low-speed precision cut-off machine. Complete with control box with electric parts and controls for rack mounting outside the enclosed cell, universal specimen holder (04436901) and flange set 65 mm dia., as well as 42 mm dia. Cut-off wheels and cutting fluid are ordered separately. Length of supply cable is 8.0 m; 1 x 100-240 V / 50-60 Hz.
Low-speed precision cut-off machine. Complete with control box with electric parts and controls for rack mounting outside the enclosed cell, universal specimen holder (04436901) and flange set 65 mm dia., as well as 42 mm dia. Cut-off wheels and cutting fluid are ordered separately. Length of supply cable is 8.0 m; 1 x 100-240 V / 50-60 Hz.
Struers’ equipment is in conformity with the provisions of the applicable international directives and their appurtenant standards.
Struers’ products are subject to constant product development. Therefore, we reserve the right to introduce changes to our products without notice.
Technical Data
Minitom Remote Technical Data Sheet
Struers Technical Data Sheets are designed to help you make the best choice of equipment for your particular purpose. You can find important information such as capacity and performance specifications, dimensions, weight, electrical data, noise levels, ambient conditions, and safety. In many cases you can also obtain an overview of accessories offering higher capacity and performance.
Download technical data
Cutting consumables
-
Abrasive cut-off wheels
Extremely hard ferrous metal (500 < HV < 1400).
Go to webshop Contact sales -
Abrasive cut-off wheels
Very hard ferrous metal (400 < HV < 800).
Go to webshop Contact sales -
Abrasive cut-off wheels
Hard Ferrous metal (275 < HV < 750).
Go to webshop Contact sales -
Abrasive cut-off wheels
Medium hard ferrous metal (200 < HV < 550).
Go to webshop Contact sales -
Abrasive cut-off wheels
Medium soft ferrous metal (100 < HV < 500).
Go to webshop Contact sales -
Abrasive cut-off wheels
Soft ferrous metal (75 < HV < 375).
Go to webshop Contact sales -
Diamond cut-off wheels
For materials with HV 500-2400.
Go to webshop Contact sales -
CBN cut-off wheels
For materials with HV 500-2400.
Go to webshop -
Additives for cutting
For recirculation, cooling and cleaning.
Go to webshop Contact sales -
+
-
−
Correct preparation solutions
"True structures require proper and correct applications. Different material properties require broad application knowledge. Struers application specialists are experts in optimizing preparation methods, because application knowledge is necessary to select the correct preparation solutions. Your material – our application solutions.”
Birgitte Nielsen
Application Specialist, Struers ApS
MEET SOME OF OUR CUSTOMERS
Don’t make do with what we say! Look for the truth in the experiences of the people who use our equipment and knowledge. We asked a few of our loyal customers to tell us what they think is most important about Struers.
We have always experienced extremely repeatable and consistent, high-quality results. The consistency and reliability of our Struers cutting machines was instrumental in our decision to install a similar Struers system in our plant in Indonesia.Grinding Media, Moly-Cop (Australia) Glenn Sullivan Technical Developments Manager
XPS Consulting & Testwork Services is a licensed metallurgical engineering and testwork business that includes mineralogical and materials characterization. We have used Struers’ sample preparation equipment and lab consumables for almost 20 years and are very satisfied with the quality of the products and the support they provide to us. As a consulting firm, we strive to produce the highest quality results for our customers, and the Struers’ products have assisted us in reaching that goal.XPS Consulting & Testwork Services (Canada) Patricia Stack Mineral Science Department
The backbone of our quality assurance program, our Struers laboratory promotes ease of use, resulting in high output and efficient use of our human resources and huge time savings. In my opinion, Struers equipment provides the most efficient and consistent method for examining the quality of our fastener products.Ideal Fasteners Pty. Ltd. (Australia) Neville Deutscher Managing Director