Top

Grinding stones and diamond grinding disc

High removal grinding for any material

Ideal for high-volume, high-throughput set-ups, our wide range of grinding stones and diamond grinding disc provides exceptional high removal grinding to reduce your overall preparation time.

  • Achieve optimal planeness very quickly – and reduce the time spent on your fine grinding step
  • Maximize your quality and reproducibility with a dedicated stone or disc for your material

Buy in e-Shop

Contact us

How can our stones and disc support your materialographic process?

Balance high removal and low deformation

High material removal often comes at the cost of deformation, increasing the time or removal needed in the following step. Our grinding stones and diamond grinding disc are optimized to provide high, consistent removal with low deformation. This reduces the time spent on your fine grinding step and your overall preparation time – ideal for high-volume labs, or labs that need a very fast throughput.

Plane grind any type of material

To cater for a wide range of materials, we have developed a variety of different grinding stones. There are stones for softer and harder materials as well as for ductile/brittle materials. For extremely hard materials like sintered carbides or ceramics, we have a diamond grinding disc which reduces the plane grinding time significantly.

Fitting into your process or set-up

Our stones and disc require equipment just for high removal grinding, such as the AbraPlan or Hexamatic. As with all of our equipment and consumables, these have been specifically designed to work together to provide the best results. The high removal provides optimal planeness very quickly, including very uneven specimens where you might not have a materialographic cutting set-up.

KEY FEATURES

Consistently High removal

Consistently high removal

In tests, Struers stones had an average removal rate of 474 μm/min, providing high, consistent removal for ultra-fast plane grinding

Minimal deformation

Minimal deformation

By limiting deformation in your plane grinding step, you reduce the time and removal needed in your next step

Optimized to your material

Optimized to your material

There is a dedicated stone or disc for both softer and harder materials, ductile/brittle materials, as well as extremely hard materials like sintered carbides or ceramics

Large surface area

Large surface area

Prepare large specimens or many specimens in a very short time with the ability to prepare specimen holders up to 200 mm in diameter

Grind uneven specimens

Grind uneven specimens

If you do not have a materialographic cutting set-up, you can plane grind uneven specimens very quickly with our high removal grinding stones or disc

Water cooling

Water cooling

Our stones and disc use water for cooling, the ideal coolant for minimizing heat. This also reduces your need for classified products, while allowing for recirculation to save water

Find your ideal high removal grinding solution

Grinding stone 6A27

Grinding stone 6A27 & 6A36 #150

• For hard steels or steels containing many carbides in the 500-800 HV range
• Resin-bonded aluminum oxide grinding stone
• Grit 150
• Used for AbraPlan and Hexamatic
Download technical specifications here

Buy in e-Shop

See full details and technical specifications

Get a complete overview of our grinding stones and diamond grinding disc together with their full details and technical specifications.

Choose your surface

Would you like tailored advice for your material, task or set-up?

Contact our experts
ensuring

Ensuring certainty

Minimize your supply chain risk and ensure uptime with high quality consumables, reliably delivered when you need them. All consumables ship within 48 hours from our distribution centers across the U.S., Japan, China, Germany and Denmark. Our ISO 9001-certified LEAN production and strict, in-house quality control ensure all consumables perform as promised and contribute to a safer workplace.

Contact us