The control unit

Both the power supply and the programming and monitoring functions are incorporated in the control unit. Easy touchpad operation combines with a back-lit graphic display of all parameters and monitoring of the process.

Polishing

The separate unit design enables the polishing unit to be placed away from the control unit in a fume cabinet, for example. The process can also be started directly from the polishing unit. The electrolyte is stored in easily exchangeable electrolyte containers that are inserted into the polishing unit.

Built-in safety features

All functions are controlled using advanced software. An increase in the electrolyte temperature above a pre-defined limit will automatically result in either a warning or shut-down of the procedure in progress. Voltage and current are constantly monitored, and settings are automatically kept within the limits of Lectro-Pol-5.

Advanced cooling control

LectroPol-5 features a built-in measuring and control system that constantly monitors the electrolyte temperature. If the temperature exceeds the given limit, water is run through the cooling coil. If no water is connected, or the electrolyte temperature continues to rise, a warning is displayed, and the LectroPol-5 automatically shuts down.

Polishing at below freezing

A special LectroPol polishing unit is used for this application. Stainless steel cooling coils are led directly to the back of the polishing unit where they can be connected to an external cooling unit. The external cooling unit takes over temperature control and regulation of the electrolyte, enabling materials to be polished at sub-zero temperatures.

External etching

LectroPol-5 can also be used for external etching (controlled by a preset voltage exposure and polishing time).