Three tank sizes 50 l, 100 l and 150 l. The tanks are produced in stainless steel for a long product lifetime and high heat dissipation.

The control unit starts and stops the pump as required by the connected machine.

Re-useable filter bag

A magnetic candle can be inserted into the tank to collect magnetic particles that are too fine to be picked up by the bandfilter (option).

Large pump 112 l/minute at 1.0 bar Small pump 60 l/minute at 1.0 bar

The automatic bandfilter unit, Coolimat-2000, is intended for use with cut-off machines with high sample volume. When used, all debris is automatically disposed of. It comes with a large 200 l tank and 100 metres of paper roll for long uninterrupted use and infrequent paper changes. Coolimat-2000 is also available in a static filter version.

Quick clamping tools are used for cutting of workpieces with various uniform geometries, such as shafts, when quick relocation is required.

Quick clamping tools feature stainless steel jaws and base plate, and have a low build height for greater cutting flexibility.

• Available in 8.0, 10 and 12 mm T-nut versions.

Jaw blocks are used together with Struers’ quick clamping tools. You can choose between three versions for optimum clamping:

• Grooved – for generally improved grip of workpieces
• Rubber – for pressure sensitive workpieces, for example
• Prism – angled to press the workpiece downwards

The T-slot turntable is used for angular cutting of tubes, for example, between 0° and 90°.

• Available in a 10 mm and 12 mm version.
• The table height is 42 mm.

The parallel cutting table is used for cutting uniform slices with accurate and fast repositioning of the workpiece.

• It features 10 mm T-slots.
• The table height is 58 mm to match the depth of the cutoff machines, and the entire table can be used for clamping.
• The tabletop dimensions are 140 x 265 mm, and the cutting table has a positioning range of 60 mm.
• The handle is detachable.

The vertical clamping tool is specifically designed for multi-purpose clamping of irregular samples.

• Max. clamping height: 58 mm or 105 mm with an optional riser block.
• Set of swivel shoes for optimum hold (option)
• Arm extension: Adds 90 mm reach (option)
• Available in 8.0, 10 and 12 mm T-nut versions
• Available on sliding rail

Clamping of large, regularly shaped workpieces

• For clamping of large, irregularly shaped workpieces
• Anchor block for retaining chain
• Available in 12 mm T-nut version

Essential for clamping of irregularly shaped workpieces

• Suitable for crankshafts, for example
• Turnable, horizontally and vertically adjustable
• Height adjustment range: 60-80 mm, 80-100 mm or 100-120 mm, using three different crowns
• Two versions: Mounted on a base plate or mounted on a T-nut for direct insertion into the T-slot

For longitudinal sectioning of bolts and fasteners

• Complete with tungsten carbide tipped cutoff wheel support
• Clamping range: 4.0 mm -12 mm
• For 8.0 mm T-slots