Minitom
Small, automatic precision cutting machine for gentle sectioning of delicate workpieces
Minitom
- Workpieces up to 30 x 40 mm
- High-precision tabletop machine
- Low speed protects against heat deformation
- Accuracy of +0.01 mm
- 75-125 mm (3-5’’) CBN and diamond cut-off wheels
A small, low-speed, automatic precision cutting machine for sectioning delicate materialographic workpieces that can’t tolerate the heat generated by high-speed cutting. The gravity feed design allows for sectioning of various material types, with high accuracy and reproducibility. Minitom is designed with speed and efficiency in mind. The simple design means it only takes a few minutes to setup a cut, and the machine can be set to stop automatically once the cut is done, giving you more time to work on other tasks.
Get a high-quality cut in delicate materials
With Minitom, you can section small and delicate materialographic workpieces that can’t tolerate the heat generated by high-speed cutting. Whatever type of material your work with, the gravity feed design enables you to section deformation-free samples with high reproducibility.Work with extremely high accuracy and precision
Minitom enables you to section workpieces to an accuracy of +0.01 mm using the micrometer screw, making it ideal for small pieces that require high precision.Work fast to increase your throughput and efficiency
Minitom is designed with simplicity in mind, enabling you to work fast. It only takes a few minutes to fix the workpiece and set the stop position, cutting pressure and cut-off wheel rotational speed – so you can cut more pieces in less time and increase overall efficiency. See the additional features in the brochure
Facts
Model types
Get your Technical Data Sheet for Minitom
Get your brochure for Minitom
Model types
Minitom
Minitom is a low-speed precision cut-off machine for sectioning small and delicate materialographic workpieces that can’t tolerate the heat generated by high-speed cutting. It can handle various material types and comes with a universal specimen holder and flange set (65 mm diameter and 42 mm diameter).
Cut-off wheels, cutting fluid and additional specimen holders are ordered separately.
Minitom is a low-speed precision cut-off machine for sectioning small and delicate materialographic workpieces that can’t tolerate the heat generated by high-speed cutting. It can handle various material types and comes with a universal specimen holder and flange set (65 mm diameter and 42 mm diameter).
Cut-off wheels, cutting fluid and additional specimen holders are ordered separately.
Specimen holder arm |
|
| Balance weight | 200 g / 7 ounces |
| Cutting weight | 350 g / 12 ounces |
Cut-off wheel | |
| Size | 75 - 125 mm / 3 - 5” |
| Arbor size | 12.7 mm / 0,5” |
| Rational speed | 100 - 420 rpm |
| Cutting capacity | 30 x 40 mm / 1.2” x 1.6” |
| Motor power | 38 W |
| Controls | Touchpad and turn knob |
| Recirculation cooling tank | 250 ml / 0.07 gallons |
| Noise level | LPA = 58 dB(A) |
| Surrounding temperature | 5 - 40° C / -13 -131° F |
| Humidity | Less than 95 % RH non-condensing |
Supply | |
| Voltage / frequency | 100 - 240 V / 50 - 60 Hz |
| Safety | In compliance with all relevant EU directives |
Dimensions and weight |
|
| Width | 28 cm / 11" |
| Depth | 40 cm / 15.7" |
| Height | 40 cm / 15.7" |
| Weight | 8 kg / 17.6 lbs. |
Struers’ equipment is in conformity with the provisions of the applicable international directives and their appurtenant standards. Struers’ products are subject to constant product development. Therefore, we reserve the right to introduce changes to our products without notice.