Magnutom-5000
- Intuitive icon-based programming
- Simulator function
- AxioWash automatic cleaning
As the only cut-off machine in its field, Magnutom-5000 can map out the most complex of section sequences and simulate all individ...
Axitom
- Cutting capacity 125 x 290 mm / 5.0" x 11.5"
- Fully automatic high volume cutting machine
- Cut-off wheel size 350 or 400 mm / 14.0” or 16.0” dia.
- Strong motor and usage monitoring ensures high uptime
- Spacious cutting chamber for large and irregular workpieces
- Fully operational with working gloves for rough environments and industrial production
- Automatic serial cutting reduces clamping, sectioning, and operator time
- Advanced cutting modes ensure the perfect cut every time
If you visit some of the largest automotive materialographic facilities around the world, there is a good chance that you will come across the Axitom fully automatic cutting machine. One of the reasons for this is the fact that Axitom meets the very specific demands which the automotive industry makes regarding workpiece sizes, complex shapes, and serial cuts. A very large cutting chamber, automatic tables, and movement in X, Y, and Z directions allows for positioning, clamping, and sectioning of both large, complex, and irregular workpieces. Axitom is available in two models and multiple versions, and throughout this webpage the full-featured model is displayed. Get an overview of all versions at the bottom of this page.
Never again falling short on uptime due to a strong motor, automatic process, and usage monitoring.
Along with Axitom’s powerful motor, the overload protection, and the OptiFeed intelligent feed control protects you from motor overload. The valuable information from the mileage monitoring together with the AxioWash automatic cleaning ensures you maximum uptime of Axitom’s fully automatic cutting machine and the extension of the total lifetime of the machine.
Irregular and large workpieces? Don’t worry. You will have plenty of room for extra clamping.
The cutting table in Axitom measures 591 x 492 mm (23.3” x 19.4”), and on top of that, with the two automatic tables, a movement of 100 mm (4.0”) in X-direction and 150 mm (5.9”) in Y-direction can be added. This allows for positioning, clamping, and sectioning of very large and irregular workpieces in Axitom. In addition, a large space underneath the cut-off wheel allows for very high workpieces up to 200 mm (8.0”) to be clamped.
Perfectly suited for rough environments – fully operable with working gloves.
All functions are controlled by only two control units, the three-axes joystick and the multifunction knob, making operation extremely user-friendly. The joystick is very robust, designed for production environments and industrial production. It can be moved in three different axes, controlling the cut-off wheel and both the X- and Y-table. The multifunction knob is used for setting all cutting parameters, and can be operated even with heavy-duty working gloves.
KEY FEATURES THAT ENABLE EASY CUTTING OF HARD MATERIALS AND LARGE WORKPIECES ON THE PRODUCTION FLOOR
-
Automatic X- and Y-table for sectioning in series and of extra-long workpieces
With the automatic X-table, great possibilities open. Axitom cutting machines, equipped with the automatic X-table, have a total of four Multi-Cut modes available, which enables you to do serial sectioning without repositioning your workpiece. The automatic Y-table is for extra-deep workpieces and extra-large specimens using the AxioCut cutting mode.
Automatic X- and Y-table for sectioning in series and of extra-long workpieces
-
ExciCut for hard materials and reducing cut-off wheel costs
ExciCut mode is an oscillating movement of the cut-off wheel to reduce the contact area with the workpiece and minimize the risk of thermal damage. In this way you can section very hard materials with better results and a better lifetime of the cut-off wheel.
ExciCut for hard materials and reducing cut-off wheel costs
-
AxioCut step for fast sectioning of extra-large workpieces
AxioCut Step is a movement of both the automatic Y-table and the cut-off wheel to enhance the cutting capacity. The table has a movement of 150 mm (5.9”), and the possible sample size to be sectioned is thus increased by the same amount. This means that Axitom-5/400 can handle workpieces up to 125 x 290 mm / 4.9” x 11.4” and Axitom-5 can handle workpieces up to 110 x 245 mm / 4.3” x 9.6. The cut-off wheel moves up and down the sample, minimizing the contact area, and avoiding overheating and thermal damage.
AxioCut step for fast sectioning of extra-large workpieces
-
AxioWash automatic cleaning program – a minimum effort to keep your machine in top shape
Maintenance and cleaning can be some of the most time-consuming elements of the cutting process, but not with the Axitom cutting machine. AxioWash is Struers’ patented cleaning program that automatically cleans the inside of the machine, and afterwards, you only need to clean the horizontal surfaces inside the chamber. That’s it - the machine is now ready for the following day. When AxioWash is used every day, only a minimum of effort is needed.
AxioWash automatic cleaning program – a minimum effort to keep your machine in top shape
-
OptiFeed intelligent feed control to avoid motor overload
Struers has developed OptiFeed intelligent feed control to eliminate the risk of damaging your workpiece, the cut-off wheel, or the motor when sectioning materials with varying properties which require different feed speed settings. With the help from OptiFeed, Axitom continuously measures the load on the cutting arm. The pre-set feed and force values are maximum values, and when the machine detects force exceeding the pre-set force limit, it will automatically decrease the feed speed to protect the workpiece, cut-off wheel, and equipment. The speed is automatically adjusted up and down to aim for a force as close to the limit as possible. The feed is thereby constantly optimized without sacrificing the quality of the cut or good wheel economy, and you get the fastest possible cut.
OptiFeed intelligent feed control to avoid motor overload
-
Store cutting sequences and save valuable time when setting up
Save setup time by storing cutting sequences for reoccurring workpieces, ensuring that your samples are ideal for the next step in your preparation process. Choose from four different serial cutting modes to do your serial sectioning exactly as you want.
Store cutting sequences and save valuable time when setting up
-
Three-axes joystick and multi-function knob for fast and easy positioning
Intuitive user interface combined with the easy to use multifunction knob and positioning of the three axes with the joystick, makes the machine programming fast and ensures a precise setup of cutting sequences.
Three-axes joystick and multi-function knob for fast and easy positioning
-
Optional 350/400 mm cut-off wheel
Choose the Axitom model with the right cut-off wheel size to fit your exact needs. Depending on the size of your workpieces, choose the Axitom model with cut-off wheel size giving the right capacity for your application. See the bottom of this page for the different Axitom models.
Optional 350/400 mm cut-off wheel
-
12 mm T-slots clamping tools for virtually anything!
Choose from a wide range of versatile 12 mm T-slot clamping tools. Enjoy the easy clamping of different geometries with the use of Struers quick clamps or vertical clamps. A wide range of support tools are available for more advanced geometries. See the Axitom brochure for the full selection.
12 mm T-slots clamping tools for virtually anything!
-
AutoStop allows you to leave the machine unattended
You can program Axitom to stop automatically when it registers that the workpiece is cut through. This saves you time as it ensures that the cut is always followed through completely.
AutoStop allows you to leave the machine unattended
Facts
Model types
Axitom is available in two versions.
Axitom
Axitom-5
Axitom-5 is ideal if you want a 350 mm / 14.0” cut-off wheel and to section workpieces sized up to 110 x 245 mm / 4.3” x 9.6”.
Axitom-5/400
Axitom-5/400 is ideal if you want a 400 mm / 16.0” cut-off wheel and to section workpieces sized up to 125 x 290 mm / 4.9” x 11.4”.
Axitom-5 is ideal if you want a 350 mm / 14.0” cut-off wheel and to section workpieces sized up to 110 x 245 mm / 4.3” x 9.6”.
Axitom-5/400
Axitom-5/400 is ideal if you want a 400 mm / 16.0” cut-off wheel and to section workpieces sized up to 125 x 290 mm / 4.9” x 11.4”.
Struers’ equipment is in conformity with the provisions of the applicable international directives and their appurtenant standards.
Struers’ products are subject to constant product development. Therefore, we reserve the right to introduce changes to our products without notice.
Get Your Technical Data Sheet for Axitom
A short and clear description that gives you an immediate overview to assist you in making the best choice of equipment.
• Capacity and performance specifications
• Dimensions and weight
• Electrical data
• Noise levels
• Safety
Get Your Brochure for Axitom
Get the full introduction, descriptive visuals, and key feature descriptions to assist you in deciding on your choice of equipment.
• Explanatory photos
• Key feature descriptions
• Technical Data Sheet
Related products
Discotom-100/-10
- OptiFeed – intelligent feed control
- AxioWash* (Automatic cleaning)
- ExciCut for very hard materials
Discotom-10 and Discotom-100 are versatile tabletop cut-off machines, designed to give you a cost-efficient opportunity to expand ...
Labotom-5/-15
- Simple control panel
- Big cutting table
- Ergonomic cutting handle
The robust design of Labotom-5 and Labotom-15 manual cut-off machines means they are suitable for use both in the lab and in the p...
Cutting consumables
-
Abrasive cut-off wheels
Extremely hard ferrous metal (500 < HV < 1400).
Go to webshop Contact sales -
Abrasive cut-off wheels
Very hard ferrous metal (400 < HV < 800).
Go to webshop Contact sales -
Abrasive cut-off wheels
Hard Ferrous metal (275 < HV < 750).
Go to webshop Contact sales -
Abrasive cut-off wheels
Medium hard ferrous metal (200 < HV < 550).
Go to webshop Contact sales -
Abrasive cut-off wheels
Medium soft ferrous metal (100 < HV < 500).
Go to webshop Contact sales -
Abrasive cut-off wheels
Soft ferrous metal (75 < HV < 375).
Go to webshop Contact sales -
Diamond cut-off wheels
For materials with HV 500-2400.
Go to webshop Contact sales -
CBN cut-off wheels
For materials with HV 500-2400.
Go to webshop Contact sales -
Additives for cutting
For recirculation, cooling and cleaning.
Go to webshop Contact sales -
+
-
−
Correct preparation solutions
"True structures require proper and correct applications. Different material properties require broad application knowledge. Struers application specialists are experts in optimizing preparation methods, because application knowledge is necessary to select the correct preparation solutions. Your material – our application solutions.”
Birgitte Nielsen
Application Specialist, Struers ApS
MEET SOME OF OUR CUSTOMERS
Don’t make do with what we say! Look for the truth in the experiences of the people who use our equipment and knowledge. We asked a few of our loyal customers to tell us what they think is most important about Struers.
My relationship with Struers dates back over many years. The reason is their expert advice, good service, and their use of our application laboratory in the case of difficult questions that are best resolved on-site.WWU Münster, Institut für Planetologie Ursula Heitmann Mineral Specimen Preparer
Since adopting Struers equipment, we have made significant savings within our manufacturing process as a result of reduced manpower requirements and productivity improvements.Nissan Motor Manufacturing UK Ltd. John Smart Production Supervisor
We have been using Struers equipment and consumables for almost 30 years and have benefitted enormously from their unparalleled service and applications support.John Crane UK Ltd. UK Bill Taylor Materials & Forensics Engineer