Microstructure of Thermal Spray Coatings: Sample Preparation and Examination
Please join us as we discuss the difficulties of preparing thermal spray coating samples and how to overcome them.
Thermal spray coatings are used in various engineering applications to provide resistance to heat (thermal barrier), wear, cavitation, abrasion, etc. Many techniques such as arc spray, high-velocity oxy fuel (HVOF), and plasma spray are available for the application of thermal spray coatings and they all basically entail the projection of molten or semi-molten droplets onto a prepared substrate where they harden and form a continuous protective coating. No matter what technique is used to apply a thermal spray coating, materialographic preparation and examination are necessary for quality control to assess coating thickness, amount and distribution of porosity, the presence of oxides and un-melted particles, as well as adhesion integrity. Incorrect grinding and polishing procedures can influence porosity results; it is therefore imperative that these steps are done in a systematic and repeatable manner.
Please join us as Struers discusses:
• Difficulties during sample prep and how to overcome them
• Preparation steps: best practices for cutting, mounting, grinding and polishing
• Methods & examples
Time and place
- Add to calendar
Brian Jones, Applications Engineer
- Play this webinar